Bus Structure:
Main Buses: One 5.1 Program, Three Stereo Program
Submasters: 8 Stereo, standard. (can be optionally configured for 5.1)
Mix-Minus: 8 Mono with automatic Confidence feed switching
Auxiliary Sends: 4 Stereo; (direct rotary control from fader channel)
Bus Minus: Direct mix-minus feed from every input fader channel
Outputs: Outputs from all buses and bus-minus are configured within
the Bridge router matrix and can be analog, and/or digital, or not fitted.
Monitor Feeds: One 5.1 (Audio Booth), Two Stereo Studio, and One Stereo Headphone feed
No running PC required
The following are the signal proccessing functions provided with all input fader channels:
Phase Reverse
Pan / Balance Control
Stereo Mode Control
4-Band, Parametric Equalizer with Variable High & Low Pass Filters
Variable Delay on all faders and mix outputs
All controls for the above functions are conveniently placed in a central facilities panels located within easy reach.
|
The D-10 has ALL the controls needed right WHERE they’re needed, complete with well-lit switches and encoder lightpipes
for fast visual confirmation — no complicated layering or function sharing to surprise your operators.
It’s all instantly there: fader, primary bus assigns, bus-minus control, aux sends and channel gain. Only secondary
functions (like equalization and dynamics) are centralized.
The D-10 has a well thought-out talkback system, eight subgroup mixes , as well as four DCMs (digitally controlled
master/mute groups).
Plus eight mix-minus buses with a full confidence feed system. Subgroups, DCMs and Masters all have dedicated faders, so these
functions are one step and error-free (no assignable faders utilized).
|
