|
My clock display is no longer illuminating. What can I do?
|
This can happen with one particular clock/timer module in use in
some Wheatstone consoles. This clock/timer module can be
identified by the presence of a large green electrolytic capacitor and
two adjacent four position dipswitch assemblies. With the console
power on, locate the four position dipswitch labeled
SW3. Locate position 2 of that switch. Turn the switch on,
leave it on for one or two seconds, then turn it back
off again. The clock should now be blinking 12:00:00, awaiting the
normal time
set procedure.
|
