IP-12 Radio console

IP12-LH-3QTR-2560-090916

Click above image to enlarge. Right or Control-click enlarged image to download hi-res version.

IP-12 Radio console

Step into the world of pure networked IP audio. The IP-12 control surface with IP88CB BLADE engine is the perfect entry into audio-over-IP networking for small to medium sized radio operations. This console is self-contained with all the faders and access to sources you’ll need, plus has room to grow due to its modular construction.
IP12-LH-3QTR-2560-090916
IP12-HEADON-2560-090916
IP-12_Radio_Mixer_from_Audioarts_-rear_view
IP-12_Radio_Mixer_Engine_from_Audioarts_-_rear_view
IP12 PANELS FULRES 122016

Self-contained networked console system. The IP-12 is the perfect entry into AoIP networking.

The IP-12 is a 12-fader control surface that taps into the power of the WheatNet-IP Intelligent Network through its IP88CB console audio BLADE engine to make a perfect low-cost, small-footprint solution for any studio. Each of its 12 input modules is equipped with an LED source name display and an A/B source selector; sources can be set via a rotary encoder in the master section. Each input module has access to four program busses and has cue and talkback switches. A 100mm long-throw fader and lighted channel ON/OFF switches round out the module.

The IP-12 control surface connects via Ethernet to its audio engine, the Wheatstone WheatNet-IP ip88cb console audio BLADE. A powerful 1RU device containing the console’s digital signal processing, input, output, and logic circuitry, the engine has no fans and may be located either next to the console or at a remote location.The master section offers control room, studio, and headphone controls with source selection, and an onboard headphone jack and amplifier. Timer controls, a master talkback button, and a built-in cue speaker with volume control are provided. There are four event switches and six programmable buttons available for user functions. The meter bridge has three stereo pairs of bright 30-segment horizontal LED bargraph meters, as well as an onboard timer with controls located in the master section.

Click here for an in-depth look at the IP-12

Console

  • 12-fader compact control surface
  • 4 stereo program busses
  • LED source name displays
  • LED-illuminated switches
  • A/B source selector on each channel strip
  • Guarded channel ON/OFF switches
  • Control room and studio monitor outputs with independent level controls
  • Headphone output with built-in amplifier and level control
  • CUE bus with built-in amplifier and speaker
  • Three pairs of bright, 30-segment bargraph meters
  • Four event switches
  • Six programmable buttons
  • Individual channel talkback with master talkback
  • Bus-Minus on all channels for telco or remote feeds
  • On-board timer
  • Uses the IP88CB Console Audio BLADE, WheatNet-IP compatible
  • Modular control surface design

 

Integrated I/O Mix Engine Blade

  • 2 mic preamps with phantom power and gain trim w/ XLR inputs
  • 4 stereo (8 mono) analog line inputs on RJ45
  • 4 AES inputs on RJ45
  • 4 stereo (8 mono) analog line outs on RJ45
  • 4 AES outputs on RJ45
  • Cue and headphone outputs on RJ45 and 1/4” jack
  • Control room and studio monitor outputs on XLRs
  • 12 programmable logic ports
  • 1 RU enclosure
  • Front panel metering for all busses and outputs
  • 100 megabit Ethernet port for connection to network, also carries cue and headphone audio back to the control surface.

PHYSICAL DIMENSIONS IP-12:

Dimensions          22.625”/57.5cm wide

(tabletop mount)   16.5”/42cm deep 

          5”/13cm high (rear)

          1.75”/4.5cm high (front) 

Weight          18.1lbs/8.2kg

          

PHYSICAL DIMENSIONS IP-16:

Dimensions          28.625”/73cm wide

(tabletop mount)  16.5”/42cm deep 

          5”/13cm high (rear)

          1.75”/4.5cm high (front) 

Weight          21.5lbs/9.75kg

          

IP-88CB Console Audio BLADE

The IP88CB provides powerful interface options, including four AES inputs, four stereo analog inputs, four AES outputs, and four stereo analog outputs on RJ45s; control room and studio stereo analog outputs on XLRs, two mic level inputs with gain trim and switchable phantom power on XLRs; cue and headphone outputs on both RJ45 and 1/4" TRS and 12 GPI logic ports on RJ45.

Videos


Click here to see the rest of the videos...

 

 

 

 

Related Products

Site Navigations