D-75 FAQ

D-75 FAQ

I installed an SP-75 and all the lights are flashing. Why?
The module must be installed in its dedicated slot, which is just to the left of the OM-75 module. If the module is installed in any other normal input slot, all its lights will flash to indicate it is improperly installed.
I can hear my mics in UTIL even when they’re supposed to be off. Can I change this?
The console comes from the factory with the UTIL bus configured to be fed pre-fade and pre-on by all inputs, except the caller inputs. This feature can be defeated by switching position 4 of the four position dipswitch on the PR-75 board, found in the console’s meterbridge area.

Site Navigations