Guest Panels

Guest Panels

Wheatstone-built panels for customizing your studios any way you want. 

 

GPC-3

This general purpose turret housing has three panel positions to hold three single-wide panels, or one double-wide panel and one single-wide panel. Select from our panels below. (Picture shown with GP-3, GP-4S, and GP-8P panels installed.)

GP-3 HEADPHONE

This headphone panel has volume control, 1/4" TRS jack and programmable switch (external amplifier required). Connects via Phoenix or RJ5 connector. Requires one logic input port for programmable switch.

GP-4S MICROPHONE

This mic control panel has ON, OFF, COUGH, and TALKBACK buttons. Buttons have LED illumination for Tally Back. Panel wires to system's logic / GPI ports, and connects via Phoenix or RJ45 connectors. Requires one logic port per button and one port for each Tally Back.

GP-4W GENERAL

This panel has four general-purpose buttons. Includes LED illumination for tally back. Panel wires to system's logic/ GPI ports. Connects via Phoenix or RJ45 connector. Requires one logic port per button and one port for each tally back.

GP-8P-IP GENERAL

This is an eight programmable button panel that communicates with the network system via TCP/IP protocol. Ships with script builder application for creating custom switching commands. Useful for conditional switching for cross point control, talkback functions, and other offer/accept style studio switching. Engraved switch caps optional.

GP-16P-IP GENERAL

This is a 16 programmable button panel that communicates with the network system via TCP/IP protocol. Ships with script builder application for creating custom switching commands. Useful for conditional switching for cross point control, talkback functions, and other offer/accept style studio switching. Engraved switch caps optional.

GP-8PR-IP RACK

Rackmount, eight programmable button panel that communicates with the network system via TCP/IP protocol. Ships with script builder application for creating custom switching commands. Useful for conditional switching for cross point control, talkback functions, and other offer/accept style studio switching. Engraved switch caps optional. 1U high.

GP-R2

This is a 1RU to house up to two single-height GP panels.

GP-U1 UNDER COUNTER MOUNT

This is a single position, under counter mount for any of the GP Series panels, except GP-16P. Comes with all hardware needed to mount to counter.

GP-SH-HP

This is a general purpose faceplate for the StudioHub SH-HP panel.

GP-XLRF

This is a general purpose panel with panel-mounted female XLR connector.

Site Navigations