BRIDGE TDM FAQ

BRIDGE TDM FAQ

XPoint is not connecting. What should I look for?

When you start XPoint it will try to connect to the IP address associated with the Tier currently pointed to in the Tier ID field of the Configure>AdvXP Setup form. Check that XPoint is pointing to the correct Tier by selecting Configure-AdvXPSetup from the XPoint menu and making sure that the Tier ID is set to 1.

Check that your PC’s IP address is on the same subnet as the Bridge or WheatNet. For example, if your Bridge is at 192.168.1.160 then your PC must be on 192.168.1.xxx.

Site Navigations